Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.

Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

---

The latest 4O3A Genius Product Software and Firmware

If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Larry _ NY8T ✭✭✭

• Activity
• Posts34
• Comments698

• Re: HELP Connecting a Flex 3000 to a Expert 1k-fa

  Larry _ NY8T

  July 2017
  If you don't find the info you need you can have the cables made for you here. http://expertlinears.com/
  1

• Re: Better Control of Audio Mute Function in Slices

  Larry _ NY8T

  July 2017
  FRSTACK setting for muting other slices.
  1

• Re: Smartlink PTT

  Larry _ NY8T

  August 2017
  I find the latency to be acceptable, it works very well for me. This has been very reliable, i use frstack for many of its features so for me this is also my ptt solution.
  1

• Re: how do you set the radio to come on after it has been powered up remotely ?

  Larry _ NY8T

  August 2017
  A simple way is to Short out a male rca plug and insert it into the remote jack on the back of your radio, this will turn the radio on when power is applied.
  1

• Re: Anyone keying a SPE amp with a Flex 5000

  Larry _ NY8T

  September 2017
  I would start with my ohm meter checking continuity first at the rca on the radio when keyed and down the line/cables. Strange that the arb shows keyed but it may not be closing, check with ohm meter.
  1

Next